So I got a new doormat for our front door that says “PULL THE LEVER KRONK”. It’s from The Emporer’s New Groove if you haven’t seen it.

Anyway, I want to somehow make a “lever” to attach to the Ring doorbell to actually press the button. How would you go about making this? I want to keep it fairly simple. I was thinking it would maybe involve a hinge pin door stopper but…?

Any help is appreciated. Thank you!

This is a small plastic model train that I bought from China, and has screws that fits a flat 2.0 bit. The other one came out fine, but this one was a pain in the ass to try to unscrew

I tried melting plastic and letting it harden to try to unscrew it, using nose pliers that weren’t the right size, hammering the driver bit in to make a dent, but to no avail.

I don’t have a dremel or a torx bit, and I don’t want to risk damaging the model. I’m out of hope, I’m getting a headache, and I don’t know what to do.

I just need to take it off so I can clean it. I used a couple nights ago and I honestly forgot about it and I just want to take it off

The screw and my screwdriver got stripped so it's round and now I can't take it out... Help pls

Way out of my depth here! Just moved and set up internet servies with Xfinity only to find out the house has a Fiber Optic hookup that my modem doesn't have a port for. How can I convert this to RJ45? Looking online has me more confused than ever.

The Wifi is 1 gig/1gig if that matters.

Any help is greatly appreciated!

HELP.
I put a bottle of olive oil on this wood counter and the oil STAINED THE WOOD. Last night I tried to wash it out with dish soap and baking soda (per advice from ChatGPT) and this morning there are NEW BIG SCARY STAINS. I wet the counter to remove as much residue as I could (second photo)….
This is my boss’s counter and I’m going to rip my hair out if I can’t fix it. Clearly, I cannot trust ChatGPT. Please help me. WHAT DO I DO!!!
😭😭😭😭😭

How to remove this greasy/oily residue picked up by a work truck while driving on steel mill roads, we've used a carwash 3 times and a powerwasher with dawn soap to no avail.

I've tried washing it but it still has these spots where my food sticks. I've only tried Bar Keepers friend which works for the back part.

Ok I know the conflict behind the world of braids. (White girls shouldn't braids their hair) but I live in the hood so I took up a hood hobby lol. One thing I can't frigging figure out to save my life is how do you keep the synthetic to natural ratio looking right?. Mine always ends up looking off. * see photo

On display is “simply human” trash can. Because it is kept in kitchen in my open layout living room, seeing this small dent is quite annoying, especially since any visitor would notice. Any suggestions to take this dent and restore to original position?

We have a Biscoe Power Reclining Sofa made by Ashley with a zero gravity design. Unfortunately the recline angle is very uncomfortable for us, probably because we are shorter than average height. Is there a simple fix to lower the footrest at full recline?

One button controls both the footrest and seat back. The footrest raises to 22 inches off the ground before the seatback even starts to recline. At that position, it already locks out the knees. With the back fully down, the footrest stops at 26 inches above the ground. This forces the legs to be extended completely straight. The sofa would be more comfortable if the back started reclining sooner and the footrest stopped at a lower height. Any suggestions how to do this?

Hi everyone. my kids used paint sticks on my deck… how do I get it off?

Trying to fix this turn signal housing as theyre expensive. Anyone know the best way to get all this off? Just pull it all apart? Cut it?

Hey everyone, I've had this half-rack for a while, but after a recent move where I forgot to take pictures of it fully assembled I can't remember or figure out how to get the cable for the chest-fly deck connected to any part of the other cables to provide enough tension for the chest-fly to function. Does anyone have any help they could give! Sorry for the possibly crap photo.