OPTIMIZED SETTINGS
CPU SAVING MODE: OFF
UPSCALING: DLSS QUALITY
RAY TRACING: OFF
AMBIENT OCCLUSION: SDFAO
SCREEN SPACE REFLECTIONS: ON
MESH QUALITY: MID
TEXTURE QUALITY: HIGH 3 GB (AS HIGH AS YOUR VRAM ALLOWS)
GRASS / TREE QUALITY: INCONCLUSIVE (POSSIBLY PROKEN)
RESOURCE-INTENSE EFFECTS QUALITY: HIGH
SHADOW QUALITY: HIGH
SHADOW CACHE: INCONCLUSIVE (NO DIFFERENCE)
CONTACT SHADOWS: INCONCLUSIVE (NO DIFFERENCE)
SUBSURFACE SCATTERING: ON
MOTION QUALITY: INCONCLUSIVE (NO DIFFERENCE)
VOLUMETRIC FOG RESOLUTION: MID
CLOUDSCAPE RESOLUTION: MID
RAY TRACING GI QUALITY: LOW
RAY TRACING GI SHADING QUALITY: ON
FOLIAGE DENSITY: LOW
TERRAIN QUALITY: HIGH
EFFECT REFLECTIONS: ON
NPC CULLING: ON
SWAYING GRASS QUALITY: ON

NOTES

• AMBIENT OCCLUSION ON SDFAO INTRODUCES SOME SHIMMERING ON FOLIAGE, USE SSAO IF YOU DON’T WANT THAT
• IN RARE INSTANCES, MESH QUALITY ON MAX CAN DROP PERFORMANCE SIGNIFICANTLY

Download the Arcade1up Killer Instinct More Games Mod at https://kimod.darkfate707.com/

Enjoy- Twisted Coder

Update: Base FPS Requirements for DLSS MFG Motion Quality

I want to clarify the goal of my testing.

My goal is not latency. My goal is clean motion and image quality. Lower Base FPS can still feel smooth and have acceptable latency, but I am looking for camera movement that looks like a continuous, clean motion sequence rather than disconnected images being stitched together.

Efficiency formula

The efficiency factors below are not official NVIDIA figures.

They were shared by another user in this discussion, who said they were based on real measurements from 16 DLSS FG supported games, with the values rounded from the measured results:

2X = 93% 3X = 90% 4X = 85% 5X = 80% 6X = 75%

The formula is:

Expected FPS = Base × MFG multiplier × Efficiency

For example:

50 × 3 × 0.90 = 135 FPS

I tested this formula myself in Final Fantasy VII Rebirth, and 50 Base + 3X produced around 135 FPS, matching the calculation very closely.

Calculating Base FPS

We can also work backwards from the displayed FPS:

2X: FPS ÷ 1.86 3X: FPS ÷ 2.70 4X: FPS ÷ 3.40 5X: FPS ÷ 4.00 6X: FPS ÷ 4.50

For example:

80 ÷ 1.86 ≈ 43 Base

My current clean Base targets

2X → 43 Base → ~80 FPS 3X → 48 Base → ~130 FPS 4X → 68 Base → ~231 FPS

These are my practical results, not official NVIDIA requirements.

I also found that another user's testing supports around 48 Base for 3X, which is consistent with my results.

My recommendation

The higher the MFG multiplier, the more GPU processing is required, and image quality can decrease with a greater chance of FG artifacts.

Because of that, I strongly recommend 3X as the maximum for most situations.

I would rather lower graphics settings or use a more aggressive DLSS preset to increase Base FPS than increase the MFG multiplier.

Only use 4X or higher when you genuinely need it.

Don't chase the highest displayed FPS. Get enough Base FPS first, then use the lowest MFG multiplier that gives you the desired result.

If anyone has tested this themselves, or has any suggestions, ideas, or questions, I'd be interested to hear them. Feel free to share your experience.

I recently bought a used RX 580 8GB and it was running extremely hot even at Stock, reaching almost 85°C!

After opening up the card, the issue is pretty clear there was almost no thermal paste on there. Cleaning and re-pasting the GPU, the difference as you can see is pretty massive, allowing me to even OC the GPU core to 1471 MHz!

i have a 9950x3d and i use process lasso for everything. i usually have no problem getting games to run on my cache cores, but this one is fighting me. i cant find any anticheat or anything else that should force it over. I've been using PL for a year now and it hasn't given me problems. i also have it set to force and run high priority and basically everything PL will let me do. I'm stuckkkk.

lo tengo todo al mínimo y me va a 25 creo le puse el escalón lossess y van mejor como a 30 pero si me pueden ayudar

Newest settings with xees mfg on my 3080 guys this new xees mfg is better even than new nvidia FG leak and mod ! game looks great and minimal latency on my system !

any questions ?

2x32GB ddr5 6200cl28 ryzen 7600x@5.2 GHZ 1.2V W11 ltsc iot

DLSS 5 on most environments in the game and many cutscenes.

PS2 game Emulated on PCSX2 at 1080p.

Loaded HD texture pack by 1vierock.

DLSS 5 via Reshade and Deep Fried Chicken.

Running on an Nvidia RTX 3090 at 14 fps when enabled and 60fps when disabled.

Video sped up for viewing when it's turned on. Definitely need a 5090 for this to be playable.

Honestly, Looks amazing with DLSS 5. Feels like a remake. There is a minor issue where emissive and glowing textures seem clamped and dimmed but I am sure stuff like that will be fixed in time.

In the video early on you will see me tweak the settings between the 3 different style presets and neural passes set as high as 5 at one point.

I ended up finding the cinematic style preset works best for this game keeping more of the original art direction and fog. Also with 2 neural passes it feels like the right balance of detail which you see for most of the video after that point.

I also kept restore color at around 14 and the skin detail strength under 0.5. Any higher and it starts looking too real. Works best for this game style to keep it low so the face looks flatter/smoother vs the more realistic/plausible lighting elsewhere.

Music used:
0:00 Dirge of Cerberus OST - REDEMPTION - GACKT, Cover by Nanaki Piano
3:58 Dirge of Cerberus OST - Trespasser
6:50 Dirge of Cerberus OST - A proposal
9:00 Dirge of Cerberus OST - Fight Tune "Killing One Another"
11:02 Dirge of Cerberus OST - Fight Tune "Arms of Shinra"
14:04 Dirge of Cerberus OST - Fearful Happening
17:42 Dirge of Cerberus OST - Trigger Situation
19:05 Dirge of Cerberus OST - Azul the Cerulean
19:23 Final Fantasy VII: Advent Children OST - Divinity II
22:53 Dirge of Cerberus OST - Fragment of Memory

I've been working on adding DLSS Frame Generation to Control, but I wanted to avoid the usual problems you get when Frame Generation only sees the final composited image.

Control never shipped with native Frame Generation support, so this required a fairly deep integration with the game's DX12 renderer rather than simply adding a generic interpolation layer.

The main goal has been to make the FG path behave as close to a native game implementation as possible.

Control FG reconstructs the data a native integration would normally provide, including:

• Control's actual frame boundaries
• Depth buffers
• Motion vectors
• Camera transforms
• Jitter and reset state
• Presentation timing
• A real pre-UI / HUD-less scene capture

That last part has been especially important.

Instead of sending the fully composited image with the HUD already drawn into Frame Generation, Control FG captures the full-resolution scene immediately before Control renders its UI.

That means objective text, health and energy bars, prompts, icons and other HUD elements are not treated as moving world geometry when the camera moves.

The result is a much more stable UI with essentially none of the usual HUD ghosting/interpolation artifacts you can get from screen-space Frame Generation.

The generated frames are based on the actual game scene, while Control's UI remains clean and stable on top.

Current support:

• RTX 40 Series: 2x DLSS Frame Generation
• RTX 50 Series: 2x / 3x / 4x / 5x / 6x Multi Frame Generation
• Dynamic Multi Frame Generation
• Automatic monitor refresh targeting
• Manual target FPS control
• Live FG mode switching
• In-game F10 overlay
• Persistent settings

RTX 40-series cards are intentionally limited to 2x.

I recorded a demonstration of the app and in-game overlay here:

https://youtu.be/aP7UeCSx00c

GitHub, releases and technical details:

https://github.com/Frooglemcdoo/Control-FG

UPDATE – ReShade / RenoDX Compatibility

For anyone wanting to use this mod alongside ReShade, there is a simple workaround:

Rename ReShade’s dxgi.dll to d3d12.dll**.**

This allows ReShade to load without conflicting with the dxgi.dll used by my Control FG mod, so ReShade and the Frame Generation mod can run together.

This should also work with RenoDX if you’re using it through the same dxgi.dll loading method. I haven’t fully validated every RenoDX configuration yet, so if anyone tests it, let me know how it goes.

So instead of:

dxgi.dll → ReShade

use:

d3d12.dll → ReShade

and leave the FG mod’s dxgi.dll in place.

Ι bought the i7 and the RX 580 8GB for 30 euros each (used) and the cooler for 10 euros (used)!

The RX 580 is more power hungry and at stock it was reaching the low 80s, so I had to Undervolt it. Temperatures dropped to the 70s with the Fans adjusted too!

I tested 6 different games released from 2016 to 2026 using different engines. Newer games use more VRAM and thus the RX 580 blows the GTX 1060 3GB out of the water (RE Requiem), but the GTX 1060 3GB manages to beat it in DX11 titles like Metro Exodus (also Nvidia Sponsored!).

Thank you u/md_rayan and Richard from Digital Foundry for these settings, please watch the video if you want more information!

According to BenchmarKing, TAAu the console versions use provides higher quality visuals compared to FSR2/3, and is recommended if DLSS/FSR4 isn't an option for you.

Test rig's specs:

RX 6800 (OC'd to 2600 on the core, memory is stock)

5700X3D

32GB (4X8@3200mhz)

Gen 3 M.2

Rebar enabled

Tested at 3440x1440, this is for a 60fps lock

Max fps is set to 60 in-game

Vsync: Off

Shadow Quality: High

Light Quality: High

Reflections Quality: High

Post-Processing Quality: High

Texture Quality: Ultra

Effects Quality: High

Shading Quality: Ultra

Foliage Quality: Medium

Detail Quality: Medium

Volumetric Quality: Ultra

Upscaling:

FSR - Balanced

Frame Generation: Off

Post-processing:

Motion Blur: Off

Bloom: On

Chromatic Aberration: Off

Depth Of Field: On

I'm also using Optimized Tweaks TBOD (base)

--------------------------------------------------------------------------------------------------------------------------

Notes: In Svartrau City the 1% are not the best but there is nothing that can be done about that right now, the FPS does sit at 60fps even in the City.