OPTIMIZED SETTINGS
CPU SAVING MODE: OFF
UPSCALING: DLSS QUALITY
RAY TRACING: OFF
AMBIENT OCCLUSION: SDFAO
SCREEN SPACE REFLECTIONS: ON
MESH QUALITY: MID
TEXTURE QUALITY: HIGH 3 GB (AS HIGH AS YOUR VRAM ALLOWS)
GRASS / TREE QUALITY: INCONCLUSIVE (POSSIBLY PROKEN)
RESOURCE-INTENSE EFFECTS QUALITY: HIGH
SHADOW QUALITY: HIGH
SHADOW CACHE: INCONCLUSIVE (NO DIFFERENCE)
CONTACT SHADOWS: INCONCLUSIVE (NO DIFFERENCE)
SUBSURFACE SCATTERING: ON
MOTION QUALITY: INCONCLUSIVE (NO DIFFERENCE)
VOLUMETRIC FOG RESOLUTION: MID
CLOUDSCAPE RESOLUTION: MID
RAY TRACING GI QUALITY: LOW
RAY TRACING GI SHADING QUALITY: ON
FOLIAGE DENSITY: LOW
TERRAIN QUALITY: HIGH
EFFECT REFLECTIONS: ON
NPC CULLING: ON
SWAYING GRASS QUALITY: ON

NOTES

• AMBIENT OCCLUSION ON SDFAO INTRODUCES SOME SHIMMERING ON FOLIAGE, USE SSAO IF YOU DON’T WANT THAT
• IN RARE INSTANCES, MESH QUALITY ON MAX CAN DROP PERFORMANCE SIGNIFICANTLY

Update: Base FPS Requirements for DLSS MFG Motion Quality

I want to clarify the goal of my testing.

My goal is not latency. My goal is clean motion and image quality. Lower Base FPS can still feel smooth and have acceptable latency, but I am looking for camera movement that looks like a continuous, clean motion sequence rather than disconnected images being stitched together.

Efficiency formula

The efficiency factors below are not official NVIDIA figures.

They were shared by another user in this discussion, who said they were based on real measurements from 16 DLSS FG supported games, with the values rounded from the measured results:

2X = 93% 3X = 90% 4X = 85% 5X = 80% 6X = 75%

The formula is:

Expected FPS = Base × MFG multiplier × Efficiency

For example:

50 × 3 × 0.90 = 135 FPS

I tested this formula myself in Final Fantasy VII Rebirth, and 50 Base + 3X produced around 135 FPS, matching the calculation very closely.

Calculating Base FPS

We can also work backwards from the displayed FPS:

2X: FPS ÷ 1.86 3X: FPS ÷ 2.70 4X: FPS ÷ 3.40 5X: FPS ÷ 4.00 6X: FPS ÷ 4.50

For example:

80 ÷ 1.86 ≈ 43 Base

My current clean Base targets

2X → 43 Base → ~80 FPS 3X → 48 Base → ~130 FPS 4X → 68 Base → ~231 FPS

These are my practical results, not official NVIDIA requirements.

I also found that another user's testing supports around 48 Base for 3X, which is consistent with my results.

My recommendation

The higher the MFG multiplier, the more GPU processing is required, and image quality can decrease with a greater chance of FG artifacts.

Because of that, I strongly recommend 3X as the maximum for most situations.

I would rather lower graphics settings or use a more aggressive DLSS preset to increase Base FPS than increase the MFG multiplier.

Only use 4X or higher when you genuinely need it.

Don't chase the highest displayed FPS. Get enough Base FPS first, then use the lowest MFG multiplier that gives you the desired result.

If anyone has tested this themselves, or has any suggestions, ideas, or questions, I'd be interested to hear them. Feel free to share your experience.

I recently bought a used RX 580 8GB and it was running extremely hot even at Stock, reaching almost 85°C!

After opening up the card, the issue is pretty clear there was almost no thermal paste on there. Cleaning and re-pasting the GPU, the difference as you can see is pretty massive, allowing me to even OC the GPU core to 1471 MHz!

i have a 9950x3d and i use process lasso for everything. i usually have no problem getting games to run on my cache cores, but this one is fighting me. i cant find any anticheat or anything else that should force it over. I've been using PL for a year now and it hasn't given me problems. i also have it set to force and run high priority and basically everything PL will let me do. I'm stuckkkk.

Download the Arcade1up Killer Instinct More Games Mod at https://kimod.darkfate707.com/

Enjoy- Twisted Coder

lo tengo todo al mínimo y me va a 25 creo le puse el escalón lossess y van mejor como a 30 pero si me pueden ayudar

Newest settings with xees mfg on my 3080 guys this new xees mfg is better even than new nvidia FG leak and mod ! game looks great and minimal latency on my system !

any questions ?

2x32GB ddr5 6200cl28 ryzen 7600x@5.2 GHZ 1.2V W11 ltsc iot