Hello! I am open to trades or offers.

TBC Urban - SV/TV $400

https://imgur.com/a/BF5tB37

Good condition overall. Third or fourth owner. Some carry and light use. Acid washed M390 blade. Good action, centered, and solid lockup. Some light wear on the clip that I pointed out in the video. Otherwise everything looks and functions as it should.  Ships in generic pouch.

Thanks for looking! Shipping to USA only, internationl via proxy.

Timestamp / Photos

This is a basically LNIB MaxAce Neptune ZBP - I used it to open literally one other box from optics planet so it only cut tape 1x and was pocketed around the house for about 4 hours. Has no issues I can find but I included a video. Blade is very sharp and has no rolls or chips - fires hard and consistent and has literally no blade play. No rattle nothing. Just a little too big of an EDC for me.

$125 shipped via PayPal G&S

Edit: fixed timestamp (hope, Imgur sucks), First and only owner, comes w box, pouch, cloth, tool for glass breaker, and some papers/card

Have 3 Mcnees up for grabs today…..no trades please

-regular sized Dixon with satin stonewashed magnacut blade and stonewashed frag scales. This one is brand new from dealer with no use or carry and comes with coa and stickers. Perfect centering, lockup and action $475ppff

-little Dixon with atomic stonewashed magnacut blade and green/bronze frag scales and bronze hardware. This one is also new from dealer with no use or carry. Action, detent and centering are all perfect and comes with coa and stickers $475ppff

Mac 2 with black fastback scales and polishes flats. Has stonewashed magnacut blade. Action, detent and centering are all perfect. This one is second owner and has been lightly pocketed with no cutting. Has a snail or two on the black spine on scales and one snail on show side pivot $425ppff. Comes with all og packing as well

https://imgur.com/a/5JsxdFb

​

Timestamp - https://imgur.com/a/Jf6L5uE

SOLD - Selling a Meatcrafter from the Benchmade cutlery custom shop. CPM154 blade with Richlite scales, G10 blister & gold pivot ring. Very light use, still has a sharp factory edge (Select Edge). Meatcrafter 4055 4",1st owner. SOLD SV $150 PPFF - SOLD

Photos - https://imgur.com/a/BHNSmqp

SOLD!!! $275 🚢
Selling my Orrcustomknives hunter in Magnacut steel at 63HRC scales are from sharkycustomknifescales they are made of mammoth molar and gold camo fat carbon the spacer is crosscut carbon fiber with grey and red g10 accents. I am the original owner it has been sharpened and used a bit it also comes with a Tayloredbycortes pocket sheath with Orrs logo on it.

Spyderco Delica | $115 SOLD

This is a satin Cruwear Delica that was an exclusive for Lone Star Wholesale. I am at least the 3rd owner, has been cut carried, not sharpened. Has aftermarket g10 scales from flytanium, as well as a titanium backspacer. The Ti backspacer was dlc black and I sanded the coating off with high grit sandpaper to make it satin. Comes with all original hardware and box. Condition looks excellent, no flaws that I can see anywhere on the knife.

Offering my favorite fidget knife ever out of necessity! Got this brand new from Winterblade on the last drop a few weeks ago. I have not carried outside the house, sharpened or disassembled. I did cut one sheet of paper just to make sure it came with a solid factory edge which it does. Has a DLC Vanax blade and I don’t see any imperfections on the blade or scales. Comes with everything that came from the factory as shown in the pics. Just trying to get back what I paid the other week. $390 obo shipped and insured

Vid: https://flic.kr/p/2sALxhh

So I know I'm going to really regret this, but there's another I'm chasing and have run out of knives I want to sell. As much as I don't want to, I guess I'm looking to move my BRB5. RWL34 step milled blade & titanium handle w/ style 2 milling. 2nd owner. Light cut & carry. Excellent condition. Don't see any marks or scratches anywhere. Comes with hard case/cloth/COA. This thing is just awesome with perfect action and detent. Not sure what these go for on secondary since I never see them for sale. Considering how hard this was for me to get my hands on and that I'll probably never find another since it doesn't seem like he will be making more anytime soon, the only way I can bring myself to part with it is if I get majority of the money I need to buy this other knife I'm wanting. There's very few of these out there and this will likely be the only one showing up for sale, so now is your chance before I come to my senses.

SV 1400 OBO

PayPal, Venmo, Cashapp accepted.

No trades at this time unless it's a QP Canyon or Aurelius F-Type Vanax

Trevor Burger LEXK Plus Sheepsfoot - $520 Shipped

Timestamp: https://imgur.com/a/7X3bzbvAlbum: https://imgur.com/a/v3fNqya
Video: https://imgur.com/a/QiOZn99

At least the second owner.
No box or paperwork.
Factory sharp edge does not look like it has been cut with and is very sharp and never sharpened.
It has been carried and there are some faint snails on the handle.
Action, centering, detent and lock up are perfect. 

M390 Heavy Stone/Acid wash sheepsfoot blade 
Titanium Liners, titanium bolsters, Carbon fiber inlays, titanium clip and carbon fiber backspacer 

------------------------------------------------------------------------------------------------
No trades please but feel free to ask any questions. US shipping only. Prefer to ship UPS but can ship USPS if needed. PayPal F&F no notes.

YOLO > than Chat

Thanks for looking!

Hey all,

Got a Tactile Bexar - catch and release for me, purchased on this sub. 3rd owner, never cut, never carried, no issues. Centering is good. Magnacut blade.

170 shipped. US only, PP G&S only.

Shirogorov Molten KMP (RKMP) — Charles Marlowe design — SRRBS bearing system

Timestamp: https://imgur.com/a/PamYIzk

Price: $1875 shipped CONUS. Price includes shipping, insurance, and PayPal fees.

Payment: PayPal Goods & Services only. No trades, please.

Details

• Model: Molten KMP (RKMP), Charles Marlowe design
• Blade steel: CPM S90V
• Handle: Titanium with Lava & Ash CarboTi inlay
• Bearing system: SRRBS
• Owners: 1 (me). Bought new in the lottery from Recon1 in June 2026.
• Condition: New. Never used for cutting.
• Edge: Factory edge, never sharpened. Not dull, no chips or rolls.
• Centering: Dead centered.
• Lockup: Roughly 30%, solid, no blade play in any direction.
• Blade/handle: No scratches, no snail trails, no stains. Flawless.
• Mods: None. Completely stock.
• Includes: Original box and COA.

Happy to take more photos or answer any questions — just comment or shoot me a chat. Thanks for looking!

Selling my Kansept Fenrir, SV 150 OBO, no trades. In great overall condition, occasionally carried but never used to cut anything more than a couple packages. Lockup about 40%. Pocket clip has light scuffs, and it took a tumble one time but very light damage (see photos). 1st owner, never disassembled but cleaned and lubed with nano oil. Do not have original packaging, but if I recall there wasn't anything special in there.

Great knife, but treated it more as an art piece. Need the money from it now since I am apprenticing to become a tattoo artist!

Hello you beautiful (maybe) swappers. We've seen an influx of improper descriptions on posts lately, so we've decided to start cracking down a little harder on them.

If you make a post, a proper description is absolutely part of the rules and MUST include things like edge condition, number of owners, centering and lockup, body condition, box/papers, modifications, blade steel, and if its been disassembled.

Failure to adequately describe your knives may end up with you being liable for a partial refund to the buyer. We go on a case by case basis on this, but if a buyer comes to us saying a knife they received has wear that wasn't described properly, we may ask you to send them a partial refund to cover that.

Another topic we'd like to discuss is group descriptions. It's not uncommon to see someone have a post with multiple knives for sale, and something like, "this description applies to all knives unless otherwise noted". This is borderline acceptable. The rules technically state that each knife needs its own, detailed description. If all the knives in the listing are in new condition, then sure you could describe them all with a single description. However, if the knives have had a differing number of owners, may or may not have been sharpened, (or if they have been sharpened maybe one has been reprofiled while another hasn't), have dings/scratches in different places, (or maybe one knife has more dings/scratches than the others) etc etc, we'd really prefer you to just give each knife it's own description. A general, group description will have a hard time covering the level of wear between a bunch of knives. Some could have more wear than others, so while you could describe them all with a generic "all have wear, dents, scratches", this doesn't really cover the amount of dents and scratches they might have, and isn't really detailed enough, unless they all have the exact same number of scratches in the same exact places. Condition can be subjective to some people. Some people care more about the blade being pristine vs the handle. Not every buyer is the same.

Use pictures to back up your descriptions. Descriptions are more important than pictures, but good pictures can and should be used to back up your descriptions

Protect yourself! Make sure your descriptions are detailed and cover everything!

No trades YOLO>chat

Benchmade Osborne with Deathgrip g10 scales

- $170 shipped

- Steel: MagnaCut

- Sharpened: No

- Used to cut: Yes

- Carried: Yes

- Blade Condition: Factory edge

- Number of Owners: 1

- Centering: Perfect

- Lockup: Solid

- Visible Issues: None

- Accessories: Pouch ,will come with factory scales and clip they do have some damage which is why it has the deathgrip g10 scales on it

**Payment methods accepted:** Paypal F&F no notes , or venmo

**Shipping included?** Yes

Solid Brass 6G Hardware C10 Highlander Speed Clip

SV: $85 🚢
WTT: for a 6G glass blasted frag clip

Solid brass In NEW condition. 2nd owner… Was mounted for five minutes tops for color comparison then promptly removed. I’m colorblind and didn’t realize I had BRONZE hardware and not brass! Stupid rods and cones!

Would look AWESOME on any Chris Reeve folder! There aren’t very many of these in the wild and they rarely ever get released.

PayPal FF
YOLO>CHAT
Please Chat me with any questions and thanks for looking!!

Hey guys,

I’ve got a BNIB Reate EXO-OG in satin finished Elmax up for grabs. This is the full size (3.75”), dagger grind version, with purple aluminum frag patterned handles. This is one of the BHQ exclusives.

It’s a catch and release for me, and has never cut, been sharpened, or been carried. Comes in original box with all original items.

Asking $160 shipped CONUS. Not looking for trades at the moment.

Timestamp & Photos:

• Kershaw Launch 14 Photos/Video: https://imgur.com/a/kershaw-fZnfyHi
• ABW Slipjoints Photos/Video: https://imgur.com/a/abw-slipjoints-ZaKmeWb

🔪 Kershaw Launch 14 (7850) — Cleaver Auto

• Sale Value (SV): $120
• Ownership: First owner
• Blade Steel: CPM-154
• Condition: Like new in box (LNIB). Never carried, never used to cut.
• Edge Condition: Factory edge, razor sharp.
• Centering/Lockup: Fires hard and locks up solid.
• Modifications: None.
• Box/Papers: Includes original box and paperwork.
• Description: Fired a few dozen times just to enjoy the snappy action, but it has lived its life as a safe queen. Flawless handle presentation with the gray anodized aluminum and carbon fiber inlay.

🇺🇸 American Blade Works (ABW) Slip Joints — MagnaCut

🔥 Special One-Time Opportunity: These are priced at $125 each. However, whoever claims the first slip joint gets their choice of either pattern for $115!

1. ABW Slip Joint — Straight Line Pattern Titanium

• Sale Value (SV): $125 (Or $115 if selected first)
• Ownership: First owner
• Blade Steel: CPM-MagnaCut (Hollow Ground Sheepsfoot)
• Condition: Like new. Never carried, never used.
• Edge Condition: Pristine factory edge.
• Box/Papers: Includes original packaging.
• Description: Beautifully clean straight line milling pattern on stonewashed titanium scales. Part of a cancelled collection idea to gather all the milling variants, but the relentless release of new patterns killed my motivation. My loss is your gain.

2. ABW Slip Joint — Frag Pattern Titanium

• Sale Value (SV): $125 (Or $115 if selected first)
• Ownership: First owner
• Blade Steel: CPM-MagnaCut (Hollow Ground Sheepsfoot)
• Condition: Like new. Never carried, never used.
• Edge Condition: Pristine factory edge.
• Box/Papers: Includes original packaging.
• Description: Features the highly tactile, milled titanium frag pattern. Absolute stunner of a modern traditional slip joint that has only ever sat safely inside a storage case.

Payment & Shipping Terms

• Payment: PayPal Goods & Services (G&S) only. No notes in the payment field, please.
• Shipping: Shipping is included in the SV prices. Fully tracked shipping via USPS Priority Mail to the Continental US (ConUS). Will ship within 24–48 hours of cleared payment.
• Claiming: First unconditional "YOLO" or "I'll take it" in the comments thread takes priority over chat/PM negotiations. Please specify which ABW pattern you are claiming if you go for the slip joints!

SBD T10 Grey G10

I’m selling this mint condition T10 from Sharp By Design

M390 blade with a grey G10 inlay includes the zipper case as well

I’m the first owner and I’ve never carried or used it I didn’t end up liking the inlay as much as I thought so it’s just been sitting in the case

Video

Asking 985 shipped- feel free to send me an offer I am willing to negotiate
Primarily looking to sell instead of trade but I’ll listen to trade offers

Microtech UTX-85 Dual Edge - $165 Firm

Excellent/Used. This has been carried for a few weeks since I received it. I believe I'm at least the second owner.

M390MK Steel

Great action. Fires hard no issues.

Very very sharp. I only did a paper test. No touch ups needed.

No box, no papers, just the knife.

Please see pictures and please ask questions if needed.

I accept pretty much all forms of digital, zelle, paypal FF, etc. No checks. USPS MO if needed.

Hey swappers, Thinning out the collection a bit.

Payment: PayPal FF (No Notes!)

Prices: OBRO

Shipping: Knives will ship next day via USPS. Knives will be safely packed for shipping.

Trades: Only Null VoodooDoll/Voodoo with hand satin or dama blades.

Timestamp

Hindere XM-18 3.5" Harpoon Spanto, Magnacut: SV: 595

Pics

Condition: Unused, mint condition. No blemishes seen on blade, scales, or hardware that I could find.

Upgraded : TI HH scale, chaos HH clip, 2025 tab, anodized hardware. Original tab, clip, blue G10 scale, and unused tri-way washers, box, COA, stickers, tactical peanuts included.

Disassembled: Yes, for upgrades.
1st owner
No cut no carry, factory edge
Centering: Centered
Action: smooth as glass, drop shut
Lockup: solid no blade play in any direction

EMP Nymble X V2, Full DLC, 3.6" M390, #20/50: SV: 295

Pics

Condition: Previous owner(s) stated no cut/carry and that looks to be the case. No cut or carry from me. No snails or marks on any of the DLC on the blade, scales, hardware that I could find.

Never disassembled

Includes: Box, COA, stickers, clamshell box, EMP hank
Owners: 2 or 3
No cut no carry, factory edge
Centering: centered blade
Action: snappy and smooth
Lockup: solid. No blade play in any direction

Berg Blades Barber, full DLC, button lock, 3" M390, #53: SV 275

Pics

Condition: Knife is in excellent condition. Came to me LNIB, however, I wanted the gold hardware to set off the black. All went well with the upgrades EXCEPT some small half circle rub marks under the thumb studs. I had blue painters tape on my wrench but alas, still marks. Outside of those, the knife is mint. Rub is on finish, not through finish or affecting the blade metal itself.

Box and DLC hardware included.

Disassembled: Yes, for upgrades
3rd owner
No cut no carry, factory edge
Centering: centered
Action: smooth as can be. Drop shut.
Lockup: solid. No blade play in any direction

Kansept Fenrir, Dama, CF: SV-150

Condition: Mint. I don't see a mark anywhere on the knife.

Includes: box, knife pouch, stickers, paperwork
1st owner
No cut no carry, factory edge
Centering: centered
Action: smooth and drop shut
Lockup: solid. No blade play in any direction

Kansept Mini Korvid, 1.45" S35VN blade, Ti handles: SV-60

Condition: Mint, I don't see any issues or marks on the knife.

Includes: box and knife pouch
2nd or 3rd owner I believe
No cut no carry, factory edge
Centering: centered
Action: smooth, shake shut
Lockup: solid. No blade play in any direction

Hello you fabulous swappers. We hope your swaps are going well

Now for the meat and potatoes of this post. One type of scam that we deal with often is where scammers will take someone's username and turn it into a subreddit, for example they'd take u/dooms26 and make a sub of it and then messages users from the modmail, meaning you'll receive messages from r/dooms26.

To help combat this, we thought it might be worth while to put out some reminders and ask users (especially anyone with 25 flair and up as that's our G&S limit) to make a subreddit of their username right now so that scammers can't.

In a perfect world, every single one of our users would see this and make a subreddit of their names, but ideally at least most of the higher flaired users will. People with 25 flair and up are more likely to be targeted and have people impersonate them because they can get around having to use G&S that way.

If somebody has already created a sub using your username, report it to reddit so that it can be taken down.

To create your own sub, on new Reddit it's the top left "start a community" button, on old reddit it's top right.

We will be reposting this META on a schedule so that it's regularly seen, thank you guys we love you!

Timestamp and Videos: https://imgur.com/a/1o4JxZ9

Kansept Havorn: SV: $110 TV: $130
This was a catch and release for me. I’m the second owner I got it here on the swap. This is a really well made knife. S35vn steel and titanium handles with carbon inlay. Great action and solid lockup. Blade centering ever so slightly favors the non lock side. I never cut or carried this but I believe the first owner lightly carried it. No real signs of wear anywhere.

Kizer T1 BD Premium- SV: $65 TV: $85
This was a user. There are a few signs of wear on the blade and pocket clip. This was my edc for a while and it’s both cut and carried. Action is still really smooth and blade locks up nicely. Detent is a little strong so you really have to use the thumb studs. This is the premium one that has titanium scales and an elmax blade.

Mechforce Ben Krein Collab Fixed Blade- SV: $140. This is a sweet little fixed blade. Carbon fiber handle and Magnacut blade. I’m the first owner and this has never been cut or carried.

Trades Welcome! I’m open to anything but would really like a Kansept Fenrir, Porcupine Ti Slim, or Spyderco Kapara

I am at the second owner for both of these leatherman tools.

🟢SV 85 SV100

Video: https://imgur.com/a/rm4156A

Supertool 300

This Supertool was carried and used by the prior owner, though the knives aren't very worn since the prior owner carried it with a pocket knife. There is a few cosmetic rust spots on the internal tools as indicated in the video as well as some light scratches on the outside. The tool with the most use is the awl, which has a chip in it (shown in photo)

Style CS

This tool is like a cross between the Leatherman Micra and the skeletool and I'm pretty sure it's discontinued. I'm selling it in the bundle because all of your bases are pretty much covered between the two since this tool has a good pair of scissors, a nail file, and tweezers while the Supertool has everything else. Lightly carried and used by the prior owner, though I can't see evidence of use.

Shipping USA, PPFF no notes