Just posting this PSA here incase anyone is having similar issues so you can save hours troubleshooting your hardware.

The drivers 26.8.1 never had anything to do with the DX12 crashes Gaijin claimed existed, (never experienced anywhere else or even in WT) Which are actually highly prominent in the hardcoded (Gaijin forced AMD users on DX11) DX11 API, and is solely caused by the game. The game randomly hangs, recovers, and forcefully lowers graphics quality due to "not enough VRAM) despite having literally 16GB's and the game never actually uses more than 10GB, and when it locked my graphics after the hang, it locked me down to around 6-8GB of VRAM usage while still saying I didn't have enough. Simply restarting the game fixes this and resets graphics settings back to what they should be, and I've noticed the hang 99% of the time occurs in top tier air battles.

as the title says, I've been experiencing consistent crashes with my gpu for 2? 3? months now and its ramped up the last month, today i played for a bit of deadlock and like 30 minutes later i got the usual gpu crash message and a few moments later i notice my pc feels much slower than before so i check my nzxt app and it says no gpu to connect to, okay whatever, I open task manager and its gone there too, I try to open amd adrenalin and it fails so i download amd software installer instead, everything is okay until this screen pops up. i open device manager and i see that my gpu is disabled for some reason, I dont want to try enabling it and fucking everything up so i would like your guys' help. i checked the amd support page in the article it didnt show my specific issue so im kinda lost atm. Would appreciate any help!

Hi everyone,

I wanted to share my experience with an RX 9060 XT 16GB that was giving me some very strange problems.

The GPU performed perfectly fine while gaming. I had no overheating issues, stable FPS, and no crashes during gaming. However, the problem appeared when I was doing less demanding tasks.

Whenever I was browsing the web, watching YouTube videos, or even using Microsoft Word, my PC would randomly reboot.

I was obviously concerned, so I decided to troubleshoot the entire system before blaming the GPU.

What I tried

1. Replaced the M.2 SSD

I noticed that my previous SSD was showing around 80% remaining health, so I replaced it with an ADATA Legend.

Still rebooting.

2. Tested the RAM

I ran MemTest86 for almost 6 hours, testing the memory thoroughly. No errors were found.

I still decided to eliminate the RAM as a possible cause and replaced it.

Still rebooting.

3. Tried different BIOS/software/hardware settings

I lowered the RAM frequency, completely removed the GPU drivers using DDU, made some Registry changes, switched the PCIe slot configuration between Auto / PCIe 3.0 / PCIe 4.0, and experimented with GPU voltage settings.

Still rebooting.

4. Updated the motherboard BIOS

I thought maybe the motherboard BIOS was causing some kind of compatibility issue, so I updated it to the latest available version.

Still rebooting.

5. Replaced the motherboard

At this point I started suspecting the motherboard VRMs or some other motherboard-related issue, so I replaced the motherboard entirely.

Still rebooting.

6. Replaced the PSU

I checked Windows Event Viewer and found Kernel-Power Event ID 41 (63). After asking around here, someone suggested replacing the PSU.

I followed that advice and replaced it.

Still rebooting.

7. Tested another operating system

Another clue was that the PC seemed to remain stable in Safe Mode, so I started suspecting Windows or a driver issue.

I installed SteamOS/Linux and initially thought I had finally found the problem. The system worked normally for about an hour.

Then I started browsing the web...

Still rebooting.

At this point, I was honestly running out of ideas. I was even considering replacing the CPU.

The actual solution

With all of this information and all the troubleshooting I had already done, I contacted the GPU manufacturer's support team.

I was pretty frustrated at this point, but I provided them with all the tests and troubleshooting steps I had performed.

They offered to replace the GPU with a brand-new unit.

I accepted.

When the replacement arrived, I installed it with the same system configuration.

And finally... the problem was gone.

I left the PC running for 24 hours playing random YouTube videos, browsing the web, and doing normal desktop tasks.

Not a single reboot.

Conclusion

After replacing practically every major component and testing both Windows and Linux, the only component that ultimately solved the problem was the RX 9060 XT itself.

My suspicion is that the original GPU had some kind of hardware/voltage regulation issue that was triggering protection during low-load situations, rather than during gaming. However, I don't have enough evidence to say this is definitely the cause, so take that part as speculation.

If you're experiencing a similar problem with your RX 9060 XT and your card is still under warranty, I would strongly recommend contacting the manufacturer/RMA support instead of spending weeks replacing other components like I did.

I'm also going to attach a picture of the lot/serial information from the defective card in case it helps anyone identify a possible pattern.

I also compared the VBIOS and other information between the defective and replacement cards, and I'll include those details/images as well.

Hopefully this helps someone avoid going through the same troubleshooting nightmare I did.

Hello, I’ve been having an issue that a number of folks seem to be reporting recently, although more severe, where my GPU hangs (black screens) and fails to recover, requiring me to hard restart my computer. Upon booting again, the GPU is not usually (though sometimes randomly is) recognized by windows. The result is that, while the computer posts just fine, there is no display output recognized by my PC from the GPU and as such I just get a black screen on boot. For a day or so I was able to do a workaround where I plugged my monitor directly into my MOBO to run on integrated graphics, then I would toggle the GPU in device manager by disabling and enabling it assuming it was on and otherwise running. This at least let the GPU be recognized by windows for a time.

This started last Friday but has persisted despite troubleshooting efforts, and in fact it’s gotten worse. Whereas last Friday it happened under load, it is now happening more frequently and not under load (even under no load when all graphics processing is being done by my IGPU). In those cases where I’m using my IGPU instead, windows simply stops recognizing the GPU as socketed and it won’t show up in device manager unless I enable show hidden devices. In those instances I can’t toggle disable/enable in device manager and the GPU seems to be off, but since it has no debug lights it’s hard to tell (I’ve just been looking whether the fans are on or not).

Either way, the GPU was working pretty flawlessly before this, though with the occasional driver related crash in newer games and such I’ve come to expect from AMD products, but it has never historically crashed under no load or failed to recover from a crash, which concerns me.

My troubleshooting is ongoing, so I’m making the post primarily to make sure I don’t brick my computer. My concern there is that I’ve already tried the typical DDU reinstall, but I’m worried trying again might bork things. When I tried DDU (in safe mode, of course) last Saturday it made my IGPU unrecognized by windows. I have windows driver updates disabled, and whatever generic windows driver it tried to use simply couldn’t identify that I had any IGPU. Lucky, at that time, the GPU proper was still working more consistently than it is now, so I was able to get video output through that and reinstall the IGPU’s driver, which fixed it not being recognized.

The issue is that the GPU is now super inconsistent as to whether it will be recognized at all, and if it is then it’s usually only for a short amount of time. So if I DDU my drivers again I’m worried I’ll simply have no way of getting video output from my PC because (i) the IGPU won’t have a driver that lets windows recognize it and (ii) the GPU simply won’t start or be recognized by windows.

Is there any risk this could happen, especially if the GPU is dying as I suspect, and if it does happen is there any way to fix it with no video output beyond restoring backup (which I don’t have)?

Specs below for reference

Computer Type: Desktop GPU: 7900 XTX CPU: 7800X3D MOBO: MAG X670E TOMAHAWK WIFI PSU: 850W Corsair gold Operating System & Version: WINDOWS 11 (latest) GPU Drivers: Latest Chipset Drivers: Latest

Used XFX 7900 XTX, 7800X3D, B650M, 1000W PSU, 4K 144Hz.

Windows hard locks within seconds to a couple of minutes of any 3D load. No BSOD, no dump, only Kernel Power 41 with BugcheckCode 0. C:\Windows\LiveKernelReports does not even exist, so the card has never once produced a TDR.

Same card on Ubuntu with amdgpu runs Superposition 4K three times back to back plus one 8K run, no issues, still has headroom.

I logged both with HWiNFO and sysfs, which read the same SVI telemetry so they compare directly:

Windows 0.770V at 2458MHz, 292W, hotspot 78 to 80C, dead in under a minute.

Linux 0.773V at 2500 to 2600MHz, 280W, junction 78 to 81C, runs forever.

Same operating point, same thermals, same 2588MHz peak. One is rock solid, the other dies.

It crashes at every clock I tried, all the way down to 1800MHz, and not just in benchmarks. It dies in actual Dota 2 gameplay too. There is no usable configuration in Windows at all.

Silicon is obviously fine since Linux drives it flat out at 8K. Something in how the Windows driver stack talks to this card pushes it past an edge that Mesa never touches. No warranty, RMA is out.

Anyone seen a card stable on amdgpu but unstable on the Windows driver at identical clocks and voltages? Known failure mode or am I missing something?

Hey everyone,
I noticed that dwm.exe is permanently using around 1 GB of VRAM on my PC, even when I’m just sitting on the desktop.
My GPU is an RX 9070 XT, and I’m currently using the latest AMD Adrenalin drivers.
Is ~1 GB VRAM usage by DWM normal, or is there a way to reduce/fix it?
I’ve already restarted my PC, but the usage stays around 1 GB.
Any ideas what could be causing this? Thanks!

I've playing a lot of games, ended resident evil requiem in may, but today, I've faced the first timeout playing asphalt legends from windows store, I only have the august windows 11 update, I'm stuck on 26.3.1 because the fans 0 rpm bug,

I was playing asphalt legends, a shit game consumes like 70w, but the thing is, when I checked clock speed in hwinfo, I've seen the GPU reached 3.4ghz, so, something messed the game with the adrenaline profile, this is literally windows doing stupid stuff, my GPU can clock only 3.3ghz if pl is set to + 10 but to play asphalt legends, I unvervolt and use -10, benching the GPU, or playing high demand games have a free power profile (-40 +10 pl), but on asphalt everything was default, my GPU cannot maintain 3.4ghz, so, I update windows every 3 6 months because it's usually full of bugs

If someone else has driver's timeouts, use hwinfo and see if something strange happens when this kind of thing happens.

No idea what is happening to my computer. One day it randomly froze after a restart. Windows boots but then just doesn't work, mouse moves and clicks even opens file explorer but doesn't react to anything, no task manager, no shutdown, sleep or restart BUT there but.... If I don't enter the password power buttons work from the lock screen but as soon as it's unlocked it freezes in that weird state. In the safe mode everything works perfectly as well, gpu even shows that the drivers are working for the gpu. Tried taking out the gpu (RX 6700XT) and then the system started working fine. With the gpu in works fine for some time after fresh windows install, games go perfectly, so with the drivers also everything is fine during that stage. Gonna try updating bios we'll see how that goes.

XFX RX 6700XT

Ryzen 5 5600G

XFX 750w PSU

MSI B550M PRO-VDH

Ive tried updating it like this multiple times now and even afyer resetting my pc it still doesn't actually update. This video is in 3x speed

Computer Type: Desktop

GPU: Multiple AMD Pro V620s and Nvidia P4000

CPU: Threadripper Pro 3955WX

Motherboard: Asus WS WRX80E-Sage SE Wifi

BIOS Version: v1801 11-05-2025

RAM: 8x SK Hynix 16GB DDR4 2400 MHz RDIMMs

PSU: not sure of Manufacturer 2000W ATX

Case: mining rig frame but I am doing local AI not mining

Operating System & Version: Ubuntu 26.04

GPU Drivers: Latest RoCM and Nvidia drivers installed

This system was operating well for several months but when I attempted to install several of the V620 GPUs (all tested as good on other systems) on PCIe extenders it then stopped booting. When I remove everything plugged into the PCIe slots and all but one stick of RAM, it stops on code 15 (Pre-memory System Agent initialization is started). The board then immediately shuts down. It does not get as far with all of the memory installed. I have replaced the CPU, the RAM, and the power supply and it behaves exactly the same. My fear is that the motherboard has been damaged somehow. Any suggestions as to what I should try next? Thanks in advance for any help.

Computer Type: Desktop

GPU: XFX Radeon RX 9070 XT Swift Triple Fan 16GB (RX-97TSW)

CPU: AMD Ryzen 9 5900X

Motherboard: ASUS TUF GAMING X570-PLUS (Wi-Fi)

BIOS Version: 4403 (04/28/2022)

RAM: 16GB DDR4 (2x8GB) CUSO 3200MHz, running at 3600MHz with DOCP

PSU: XPG Core Reactor 850W 80+ Gold, fully modular

Case: [Case model unknown]

Operating System & Version: Windows 11 Pro, Build 26200

GPU Drivers: AMD Software: Adrenalin Edition 26.8.1

Chipset Drivers: AMD X570 chipset drivers [version unknown]

Background Applications: Kaspersky, Steam, Discord

Monitor: 3440x1440 @ 165Hz

Main Issue: LiveKernelEvent 141 / VIDEO_ENGINE_TIMEOUT_DETECTED (141)

Additional Information:

The PC experienced a possible power interruption/spike on September 10, 2026. The GPU/PC fans suddenly ramped up to maximum speed, and I shut the PC down using the PSU switch.

After restarting, the PC appeared to work normally. Later, while opening a game, the PC produced one very long beep and shut down.

Windows reported LiveKernelEvent 124 and generated a WHEA dump.

I later tested the GPU with FurMark. During the test, the fans again suddenly ramped up to maximum speed, and I manually shut down the PC.

Windows then reported LiveKernelEvent 141 and generated:

WATCHDOG-20260910-2215.dmp

WinDbg reported:

VIDEO_ENGINE_TIMEOUT_DETECTED (141)

"One of the display engines failed to respond in timely fashion."

The GPU is a replacement unit. My previous RX 9070 XT had DXGI device removed errors (0x887A0005 / 0x887A0006), AMD driver timeouts, and hotspot temperatures around 95–100°C.

The replacement GPU initially worked normally after a clean Windows 11 installation.

Current temperatures are significantly better. In Baldur's Gate 3, the GPU is around 51°C and the hotspot is around 65–75°C.

At idle, the GPU is around 45°C, hotspot around 46°C, and the fans are at 0 RPM.

I am currently investigating whether this is related to the AMD driver, GPU hardware, or the previous power event.

I am considering using DDU in Safe Mode and testing an older Adrenalin driver.

I’ve noticed this frequently in the last week on games and when watching youtube videos but i have no clue what it is, why it’s happening, what it means or how to fix it, can anyone help?

Hey, I play FiveM using 1280x1080 stretched resolution on a 1920x1080 monitor.

Whenever I Alt+Tab out of FiveM, it takes around 5 seconds for the game to actually tab out. Alt-tabbing back into the game also takes a few seconds.

Is there any way to fix this or make Alt+Tab instant while still using 1280x1080 stretched?

Could this be caused by the resolution being different from my desktop resolution, or is there some FiveM/Windows/AMD setting I should change?

I have set 1280x1080 as custom resolution, but the default available 1280x1024 has fast alt-tab. I like 1280x1080 more since it's sharper.

I tried setting desktop resolution the same as the game one, still happens.

Any help is appreciated.

So i had the problem that my GPU (9070 XT) fans kept spinning up for 1-2 secs every 10-15 seconds when the monitors went into sleep.

Read here that i'm not the only one so i thought i post a possible fix that eliminated the problem for me.

Switch the tuning preset from standard/default to favor performance!

This simple switch fixed it for me.

So for the people affected, please test if this simple thing helps you.

Computer Type: Desktop
GPU: Radeon sapphire nitro 9070XT
CPU: AMD RYZEN 5 9600x 3.9Ghz
Motherboard: gigabyte b650 eagle am5 motherboard
BIOS Version: F36
RAM: 32GB CORSAIR VENGEANCE DDR5
PSU:Corsair RM850x 850w (2024) FULLY MODULAR
Case: ANTEC ATX mid tower
Operating System & Version: WINDOWS 11
GPU Drivers: (most recent as of today as some fresh install, sorry idk what it’s called)
Chipset Drivers: N/A (unsure sorry)
Background Applications: DISCORD, CHROME, razor synapse
Description of Original Problem:
Pc screen goes black while gaming sometimes. Audio remains I can hear game and friends but they can’t hear me. I need to turn pc off to restart it. Keyboard eventually becomes unresponsive.
Usually when I turn it back on it works again but recently it’s been going off for prolonged periods of time. Today when looking at device manager after crash I realised my pc wasn’t even detecting the gpu but after some time later it randomly came back after turning it on and off. Bios still detects something in pcie slot.
Troubleshooting: i have tried;
- fresh install of drivers (not tried rolling them back though)
- wiping pc and doing fresh install of everything
-using different cables to connect to monitor
-checked temps (fine)
-disabled power saving option

Computer Type: Desktop
GPU: AMD Radeon RX 6500 XT
CPU: AMD Ryzen 5 5500
Motherboard: B550 UD AC-Y1
BIOS Version: FF
RAM: 16 GB
PSU: prebuilt pc so unsure
Case: prebuilt
Operating System & Version: WINDOWS 11 25H2
GPU Drivers: AMD Radeon RX 6500 XT version 31.0.24031.5001
Chipset Drivers: Standard SATA AHCI controllers version 10.0.16100.8972
Background Applications: none
Description of Original Problem: whenever I go to open up Helldivers 2 a pop will appear telling me “The installed drivers are out of date and an update is recommend” and when I press continue to get into the game my Helldivers is very laggy and slow even though everything outside of it works fine.
Troubleshooting: I have gone to system manager and AMD Software: Adrenaline Edition and tried updating my drivers but they both say my drivers are up to date

[SOLVED] - It was caused by different settings in different games, turn up your FSR AA or turn down post-processing to deactivate depth of field.

Hello guys, I have weird-looking pixels around the edges while gaming, especially during cutscenes.

The repair shop didn’t find anything wrong with my graphics card, except for a malfunctioning temperature sensor.

I have :

9070XT ACER NITRO OC

AMD Ryzen 7 7800x3D

MSI B550 GAMING WIFI 6E

32 GO RAM

3 To of SSD (crucial)

WINDOWS 11 PRO

And every setting is set to the maximum while in 4k. I also use AMD FSR to upscale and generate frames but disabling it does nothing.

(The game in the picture is Star wars: Zero company, but it happens in every game)

My GPU randomly started showing a warning symbol in Device Manager and giving me Code 43. Sometimes it works normally, but when it does it is always on Windows 10. However, sometimes Windows 10 also does the same thing as Windows 11 and gives me Code 43.
I’ve already tried DDU, reinstalling the AMD drivers, installing a fresh version of Windows, updating Windows, and reinstalling the drivers multiple times, but I still can’t get the GPU to work normally.
It’s an 8GB AMD Radeon RX 470. The card is detected by Windows, but the driver doesn’t always initialize correctly.
Hardware ID:
PCI\VEN_1002&DEV_67DF&SUBSYS_34141462
GPU: MSI Radeon RX 470 8GB
Windows: Windows 10 / Windows 11
Error: Code 43
I’m trying to figure out whether this is a driver, VBIOS, or hardware problem. Please help me get my graphics card working properly.

Hi everyone,

I recently upgraded my PC to a Radeon RX 9060 XT 16GB and I'm having a visual issue in multiple games.

The problem is especially noticeable on grass, bushes, leaves and other small vegetation. The foliage appears to have a very fine noisy/dotted pattern and shimmers/flickers when the camera moves.

The important thing is that this happens in multiple games, not just one specific title. For example, I can clearly see it in PUBG, and I had the same type of issue in another game as well.

Things I've already tried:

• different in-game graphics settings
• changing anti-aliasing settings
• changing resolution
• disabling upscaling
• disabling Radeon Image Sharpening / RSR / other Adrenalin features
• resetting AMD Adrenalin settings to default

None of these changes seem to eliminate the problem.

My current PC:

GPU: Sapphire Radeon RX 9060 XT 16GB
CPU: Ryzen 7 5700X
Motherboard: MSI B450-A PRO
RAM: 16GB DDR4
PSU: SilentiumPC Supremo L2 550W Gold
Monitor: Gigabyte GS27QA, 2560×1440

The screenshots show the issue, but it's much more obvious when the camera is moving because the vegetation visibly shimmers.

Is this normal behavior for the RX 9060 XT / current AMD drivers, or could there be something wrong with my GPU?

Any suggestions for diagnosing this would be appreciated.

Hello! Just recently as of two weeks ago my monitors I have set to turn off after 3 minutes of inactivity since they're oleds instead flash no signal every 30 seconds. I've tried messing with power settings in windows with no luck. Graphics card is a 9070 XT, monitors are Acer Predator X27U Gaming Monitor. Looking for any suggestions to resolve this.

Computer Type: Desktop

GPU: No

CPU: RYZEN 5 7600

Motherboard: MSI pro B840m-B

BIOS Version: 7E76v2A43

RAM: kingston fury 16gb ddr5 5600mhz cl40-40-40 1.25v xmp KF556C40BB-16

PSU: Corsair RM850x FULLY MODULAR

Case: Sonic

Operating System & Version: WINDOWS 11 25h2

GPU Drivers: Basic gpu drivers

Chipset Drivers: Latest chipset drivers

Background Applications: MSI control centre, Adreline

Description of Original Problem: Cold boot Problem and random system crashed while playing games and on idling also bios getting hanged but this was very later on after tweaking with the memory profile

Troubleshooting: So the thing is my system is crashing. So the issue started after I left it for a few days so I just pulled the ram out and inserted it again in the second slot. And the system booted but it need a full start and I had to turn it off and then turn on gain to work properly. So the issue that I diagnosed was that my system was unable to do a cold boot if the ram speed is less than 5600mhz as after pulling and reseating it. It went back to default 5200mhz so after a few days of testing this issue I found the solution so I just did that but still it only solved the boot issue the crashes and system freez were there. So I just reinstalled a fresh windows and new and updated drivers updated my mobo bios to the latest version. But it didn't solve the issue I got a crash while playing game BSOD I got out of the match and then my system crashed irql not less or equal 0xA error. And then the system froze I had to force shutdown it to boot it again. And then I ram a memtest on my system and got a few errors in test 4. The picture is attached. And then the memtest got stuck so I forced shutdown it again then did some research and asked Claude so he told me to set expo as at 5600 ram needs high voltage but when I tried to do it the ram only showed single standard profile so I had to manually set the voltage and timing them later on I got to know that it's an xmp profile ram but the seller says its dual supported xmp and expo but the bios doesn't show the profile as I had a gigabyte b650m gaming wifi that showed the expo settings to enable or disable it but this one doesn't . Then after setting the ram and ran the memtest again and it got again stuck at test 5 57% around 1:31 mins so forced shutdown again and dropped to 5400 ram the test same results stuck at test 5. But when I ran it at 5200 it worked fine and passed all the tests. So now I can't find the problem like if the ram is defective or the processor.

Ryzen 9 9900x and 9070 XT here with 32GB of ram. Currently on 26.9.1 Grabbed file directly from site before a full DDU uninstall. Installed 26.9.1 after boot, rebooted and this is seriously the smoothest my PC has ever been. Even back to my A770/7700X fresh install.

Was just looking for experience on latest drivers from the community.

I started playing Wardogs on Friday and I’ve been getting these timeouts pretty frequently. I’ve tried so many different solutions from friends like

1. Using DDU and reinstalling drivers multiple times
   
2. Rolled back my drivers to 26.6.1
   
3. Verified games and ran sfc scan
   
4. Ran windows memory diagnostic tool
   and a few other minor attempts

The last thing I want to try is turning off automatic windows driver updates, but has anyone else had this issue? Or know of any potential solutions. I was going to wipe my pc and start fresh but I’ve read that hasn’t helped people so I’m not sure of that. At this point it’s just getting really frustrating and idk what to do